Check code formatting

Workflow runs for Check code formatting

• stm32/powerctrl: Slow the STM32N6 flash clock during Stop mode.

  completed successfully:
  Check code formatting#119:Commit74b656epushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 30, 202619s
  More actions for workflow run 119

• stm32/xspi: Read the status register in DTR mode when switching to SPI.

  completed successfully:
  Check code formatting#118:Commitabaa77epushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 30, 20261m 16s
  More actions for workflow run 118

• esp32/machine_i2c_target: Fix reads after a partial read on ESP32-S3.

  completed successfully:
  Check code formatting#117:Commit8ee4798pushedbysfe-SparkFro
  master

  Oct 30, 202625s
  More actions for workflow run 117

• stm32/boards/OPENMV_N6: Enable PSRAM.

  completed successfully:
  Check code formatting#116:Commitdd6ce3apushedbysfe-SparkFro
  stm32n6-psram

  Oct 29, 202620s
  More actions for workflow run 116

• stm32/powerctrl: Restore all PLLs after Stop mode on STM32N6.

  completed successfully:
  Check code formatting#115:Commitc333bf2pushedbysfe-SparkFro
  stm32n6-lightsleep

  Oct 29, 202617s
  More actions for workflow run 115

• stm32/boards/NUCLEO_N657X0: Add NPU RAM to GC heap.

  completed successfully:
  Check code formatting#114:Commitdce1cbfpushedbysfe-SparkFro
  stm32n6-sram

  Oct 28, 202615s
  More actions for workflow run 114

• stm32/xspi: Read the status register in DTR mode when switching to SPI.

  completed successfully:
  Check code formatting#113:Commit63f3af8pushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 28, 202625s
  More actions for workflow run 113

• stm32/powerctrl: Restore all PLLs after Stop mode on STM32N6.

  completed successfully:
  Check code formatting#112:Commit3077ca8pushedbysfe-SparkFro
  stm32n6-lightsleep

  Oct 28, 202620s
  More actions for workflow run 112

• stm32: Run STM32N6 flash at full 200MHz.

  completed successfully:
  Check code formatting#111:Commitde3c8fdpushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 27, 202617s
  More actions for workflow run 111

• stm32: Run STM32N6 flash at full 200MHz.

  completed successfully:
  Check code formatting#110:Commit0348233pushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 27, 202614s
  More actions for workflow run 110

• stm32: Add AXISRAM3-6 and the NPU cache RAM to the heap on STM32N6.

  completed successfully:
  Check code formatting#109:Commit45971dapushedbysfe-SparkFro
  stm32n6-sram

  Oct 27, 202653s
  More actions for workflow run 109

• tests: Move path normalisation code to Test class __init__ method.

  completed successfully:
  Check code formatting#108:Commita39e77fpushedbysfe-SparkFro
  master

  Oct 27, 202615s
  More actions for workflow run 108

• stm32/boards/OPENMV_N6: Enable PSRAM.

  completed successfully:
  Check code formatting#107:Commitd424642pushedbysfe-SparkFro
  stm32n6-psram

  Oct 26, 202614s
  More actions for workflow run 107

• stm32: Run STM32N6 flash at full 200MHz.

  completed successfully:
  Check code formatting#106:Commit3c6edd0pushedbysfe-SparkFro
  stm32n6-nucleo-flash-200mhz

  Oct 23, 202619s
  More actions for workflow run 106

• esp32: Allow I2S pins to be None.

  completed successfully:
  Check code formatting#105:Commit682e3f1pushedbysfe-SparkFro
  master

  Oct 23, 202616s
  More actions for workflow run 105

• stm32/powerctrl: Reset the USB PHY after Stop mode on STM32N6.

  completed successfully:
  Check code formatting#104:Commit3e1ca81pushedbysfe-SparkFro
  stm32n6-lightsleep

  Oct 22, 202635s
  More actions for workflow run 104

• stm32/boards/STM32N6570_DK: Add board files.

  completed successfully:
  Check code formatting#103:Commit26808e1pushedbysfe-SparkFro
  stm32n6-dk-board

  Oct 21, 202613s
  More actions for workflow run 103

• stm32/boards/NUCLEO_N657X0: Add board.json.

  completed successfully:
  Check code formatting#102:Commit3b777b1pushedbysfe-SparkFro
  stm32n6-nucleo-automatic-build

  Oct 21, 202616s
  More actions for workflow run 102

• stm32/boards/NUCLEO_N657X0: Document installing mboot without ST-LINK.

  completed successfully:
  Check code formatting#101:Commit2437ecepushedbysfe-SparkFro
  stm32n6-mboot-without-stlink

  Oct 21, 202621s
  More actions for workflow run 101

• stm32/dma: Add SPI6 DMA descriptors for STM32N6.

  completed successfully:
  Check code formatting#100:Commit803acf6pushedbysfe-SparkFro
  stm32n6-spi6

  Oct 19, 202615s
  More actions for workflow run 100

• stm32/boards/ARDUINO_NICLA_VISION: Lower the QSPI clock to 66MHz.

  completed successfully:
  Check code formatting#99:Commitb70ae1apushedbysfe-SparkFro
  master

  Oct 19, 202653s
  More actions for workflow run 99

• mimxrt/lwip_inc: Reduce the TCP receive window to 5*MSS.

  completed successfully:
  Check code formatting#98:Commit424cb8dpushedbysfe-SparkFro
  master

  Oct 12, 202629s
  More actions for workflow run 98

• rp2/boards: Extend SEEED_XIAO_RP2040 to support new Plus boards.

  completed successfully:
  Check code formatting#97:Commit8cb7558pushedbysfe-SparkFro
  master

  Sep 2, 202641s
  More actions for workflow run 97

• tools/mpremote: Implement incremental preparation for romfs deploy.

  completed successfully:
  Check code formatting#96:Commitf777bc7pushedbysfe-SparkFro
  master

  Jul 31, 20261m 38s
  More actions for workflow run 96

• stm32/mboot: Enable USB sleep clock for STM32N6.

  completed successfully:
  Check code formatting#95:Commit63d1084pushedbysfe-SparkFro
  stm32n6_mboot_usb_sleep_clock

  Jul 30, 202632s
  More actions for workflow run 95